Glass Railing

SPECIFICATIONS

SAMPLE RAILING

VERTICAL POSTS
POST SIZES: 3 OPTIONS
1) 1 7/8” ROUND SK 80 GALVANIZED (0.200) WALL-3.92 LBS/FT.
2) 2” SQUARE 3/16” ALUMINUM, 1.64 LBS/FT.
3) 2 1/2” ROUND SK 80” GALVANIZED (0.218) WALL- 5.42 LBS/FT (USED WITHOUT TOP RAIL)
4) MAXIMUM POST SPACING 6’.

TOP RAILS:
3 OPTIONS
1) 1 7/8” ROUND SK 80 GALVANIZED (0.200) WALL – 3.92 LBS/FT.
2) 2 7/8” DECORATIVE TOP RAIL (0.65) WALL – .80 LBS/FT.
3) NO TOP RAIL.
4) BOTTON RAIL ON REQUEST (EXTRA COST)

GLASS: 1. 1/4” – 3/8” TEMPERED-CLEAR-OR SMOKED GLASS.

HOLDING BRACKETS
1. TOP BRACKET 1” X 2” SOLID ALUMINUM.
2. BOTTOM BRACKET 1” X 2” SOLID ALUMINUM.

POSTS ARE ROUTED TO RECEIVE THE BRACKETS ON, SO AS TO BE CONCEALED.

[hr]

STEEL CABLE FENCING

CABLE
1. STAINLESS STEEL – 1 1/8” – 1 ¼” – 3/8”.

FINISH
ALL COMPONENTS SHALL GO THROUGH A FIVE-STAGE PROCESS:
1. RINSED AND CLEANED WITH CLEAR WATER.
2. PHOSPHATE TREATED TO ETCH THE SURFACE
3. RINSED AGAIN WITH CLEAR WATER
4. COMPONENTS ARE OVEN-DRIED PRIOR ELECTROSTATIC SPRAY PROCESS TO A THICKNESS OF 2.5 MILS (0.635 mm). THE METAL IS THEN OVEN BAKED AT 450° (232 C°) FOR 14 MINUTES.
5. STANDARD COLOR AVAILABLE: BLACK
15% EXTRA ON: CHOCOLATE, ENSOR GREEN, AND WHITE.
CUSTOM COLORS ARE AVAILABLE UPON REQUEST.

Leave a Reply

Your email address will not be published. Required fields are marked *